ZTEX Shop

USB-FPGA Module 2.13a (XC7A35T, SG 1C, 256 MB RAM)
[ufm-2_13a]

1 - 4 pieces:	$191.89
≥ 5 pieces:	On request

Click to enlarge

High-Speed (480 MBit/s) USB interface via Mini-USB connector (B-type)
Cypress CY7C68013A EZ-USB FX2 Microcontroller
Artix 7 XC7A35T FPGA, Speed grade 1C
External I/O connector (consisting in two female 2x32 pin headers with 2.54mm grid) provides:
- 100 General Purpose I/O's (GPIO) connected to FPGA
- JTAG signals
- Reset signal
- External power (4,5 V .. 16 V) input
- 3.3V output
- I/O voltage output or input
256 MByte DDR3 SDRAM:
- Up to 400 MHz clock frequency
- 16 Bit bus width
- Up to 1600 MByte/s data rate
- Usable with the Xilinx Memory Interface Generator (MIG), examples are included in the SDK
128 MBit on-board Flash memory
- Allows Bitstream loading from Flash to FPGA (up to 16.5 MByte/s)
- Accessible from EZ-USB FX2 and from FPGA, see the CPLD description
Fast FPGA configuration via USB using CPLD: up to 24 MByte/s
128 Kbit EEPROM memory (can be used to store the EZ-USB firmware)
2 Kbit MAC-EEPROM: contains a unique non erasable MAC-address and is used to store firmware settings
On-Board power supply:
- 3.3 V: 2000 mA
- 1.8 V: 1000 mA
- 1.5 V: 2000 mA
- 1.0 V: 4000 mA
Optional:
- Battery to store a key for bitstream encryption
- On-board JTAG connector
Temperature range: 0-70°C (board), 0-85°C (FPGA)
Usable with free Xilinx Vivado and ISE Webpack
Powerful Open-Source SDK with many examples

For more information, please visit the products webpage.

This product was added to our catalog on Wednesday 13 August, 2014.

Customers who bought this product also purchased

USB-FPGA Module 2.16b (XC7A200T, SG 2C)	USB-FPGA Module 2.13d (XC7A100T, SG 2C, 256 MB RAM)	Debug Board (with stackable pin headers)
14 pin JTAG header	2x32 pin male pin header	12V/5A Power supply